Highly customizable acoustical solution to realize the most challenging design intent.

Resembling the classic appearance of drywall or plaster, Claro is a malleable product with superb sound-absorbing properties. Claro is ideal for areas where indirect lighting is required with a 94% light reflectance on the standard white (CSW-100). The finish is applied to the face and edge of the panels to creating a monolithic appearance. Claro can be color-matched to a wide range of paint chips, pre-curved, and custom engineered to attain a vast array of unique shapes and sizes.

  • Extensive Customization Capabilities
  • 94% Light Reflectance on CSW-100
  • Certification for High Seismicity
  • Class A Fire Rating on Finished Composite
  • Fully-Engineered Product

 

PRODUCT FEATURES

  • NRC Values of up to 0.9
  • Fire Rated Class A Composite
  • Color, Shape, Cutout, 3D
  • Full Access, Seismic Certified
  • Up to 57% Recycled Content
  • Health-Friendly Components

FINISHES

Select our Claro Standard White (CSW-100) to achieve up to 94% light reflectance and fill the space with light, opt in for Metallo™ Silver to mimic the look of a metal surface or specify a color to hold your design intent. Decoustics has the capability to custom color-match to a wide range of paint chips.

*Please note the color selector on this website is intended for demonstration purposes only. Variations may occur between digital display and actual sample. Please provide a control paint chip and request project-specific submittals to achieve the desired design intent.

Decoustics offers a full suite of project management services and utilizes state-of-the-art technology to deliver the ultimate design flexibility. Claro stipple textured acoustical ceiling and wall panels are custom-engineered to a wide range of unique shapes and sizes, and can be styled to compliment any space. Claro comes in Claro Standard White (CSW-100) acoustically transparent finish that achieves 94% light reflectance and can be matched to a wide range paint chips to meet specific design requirements.

Application

Ceilings and Walls above head height.

Shapes

Panels can be pre-curved and custom engineered to attain a wide range of unique shapes.

Cut outs, different thicknesses and add-on elements are also available.

Sizes

Up to a maximum of 48″ in width and 96″ in length for Ceilencio® and other ceiling suspension and wall mounting systems. Other sizes may be available, please inquire.

Weight

Approximately 1lbs/ft2 (4.88kg/m2) including Ceilencio® suspension system.

Color

Custom color Claro to achieve your design intent.

Color-matching to a wide range of paint chips.

Silver metallic look with shimmer available with Metallo™.

Edges

Square painted metal edge to match surface finish.

Design Return options and integrated perimeter profiles are also available.

Back

Special vapor barrier option for ceiling application. Option to match face of the panel.

Noise Reduction Coefficient (NRC) up to 0.9   |   Sound Absorption Average (SAA) up to 0.87

Type F5 Mounting: Panels are mounted 5mm from the substrate

Type E400 Mounting: Panels are mounted 400mm from the substrate

Note: The information provided in this Data Table is accurate to the best of our knowledge at the time of publishing. However, we reserve the right to make changes when necessary without further notification. Suggested applications may need to be modified to conform with local building codes and conditions. We cannot accept responsibility for products that are not used, or installed to our specifications.

VIDEO: Claro Noise Absorption inside Utah Jazz Practice Facility

We offer a wide range of suspension and mounting options to achieve your design intent with ability to modify and custom engineer systems to accommodate unique and challenging designs.

SUSPENSION AND MOUNTING SYSTEMS

Decoustics Ceilencio® is an integrated acoustical panel ceiling system consisting of a proprietary concealed extruded aluminum grid and panels. The ceiling is 100% downwardly accessible via a unique torsion spring mechanism which permits individual panels to be “hinged” down (or completely removed if necessary) for access to mechanical and electrical services. The grid is suspended using hanger wires, rods or similar suspension components.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Typically installed in areas where a floating panel effect is desired. A minimum 4″ (100mm) reveal is required around each panel to facilitate a progressive installation. A 1″ (25mm) reveal around each panel is possible, however perimeter panels require a minimum 4″ (100mm) reveal.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Suspended Reveal Ceiling System Data Sheet

Typically installed in areas where a floating panel effect is desired. A minimum 1″ (25 mm) reveal is required around each panel to facilitate installation. The panels clip onto an installer supplied frame or grid system and are individually removable by lifting upwards moving sideways and lowering. The frame or grid system is secured using hanger wires or rods supplied by the installing contractor.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Suspended Accessible Reveal Ceiling System Data Sheet

Typically suspended directly from frame/grid to conceal the metal suspension system. Panels are installed using a mechanical z-clip (slide and engage) method of fastening.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Direct Suspended Ceiling System Data Sheet

Typically fastened directly to a firm substrate such as gypsum board, concrete, steel deck, wood or a similar surface. Panels are installed using a mechanical z-clip (slide and engage) method.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Direct Mount Ceiling Data Sheet
Direct Mount Installation Manual

Panels lay into an exposed standard or custom suspension grid and are supported on all edges. For larger panels an intermediate T-bar is employed and secured to clips on the panel backs to reduce panel sag. The entire assembly lays into the exposed grid. In all cases, the ceiling system is 100% accessible. Ceiling perimeter trim options include an exposed wall mold, shadow mold, or T-bar.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Lay-In Ceiling Panel System Data Sheet

Panel ends are supported at ceiling-wall junctions using exposed wall moldings or T-bar components. Panel can be either butted together, have defined joints or mounted to provide wide reveals. Span panels can be up to 10′ (3050mm) long with 100% accessibility to plenum spaces depending on panel size. Panels are removed by lifting, tilting and lowering.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Span Ceiling Suspension System Data Sheet

Typically used in waffle slab construction to create a ceiling with depth and architectural interest. Sunken panels are attached using mounting J-clips and a minimum space of 2-1/4″ (57 mm) is required behind the panel to accommodate hardware and installation. The back of the panels are typically positioned 2-1/4″ (57 mm) down from the top of the recess in the waffle (coffer). A floating panel effect is achieved via a minimum 1″ (25 mm) wide reveal which is required around each panel to facilitate installation.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Coffer Ceiling Suspension System Data Sheet

Design returns can be a great way to finish a ceiling design. Variety of custom design return options are available including: built-up panel edge, knife-edge and continuous extruded aluminum return. Decoustics specializes in finding the right custom solution to achieve your design intent.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Design Return Ceiling Suspension System Data Sheet

A number of wall mounting options are available for panels including: mechanical, hook and loop, adhesive, and magnetic. Mounting hardware will vary based on the substrate and finish of the panel.

SPECIFICATIONS

DETAIL DRAWINGS

INSTALLATION

Brochures, Data Sheets & Installation Manuals
Wall Mounting Instructions Data Sheet