Decoustics Easy-Clean Claro® acoustical panels offer creative and practical flexibility from design to installation—and beyond. It is highly customizable: tailor size, shape, form, and curve to your specifications and panels arrive to site ready for installation. But eye-catching, sound absorbing results are only part of the story: the smooth face-panel finish is engineered to be resistant to water and common offenders such as dirt and fingerprints, so panels can be easily cleaned and disinfected1 with minimal effort.
1 Not recommended for daily cleaning. See Cleaning Instructions for more information.
2 ClearChem Declaration for low VOC Components may not be available with all product configurations.
Decoustics offers a full suite of project management services and utilizes state-of-the-art technology to deliver the ultimate design flexibility. Decoustics Easy-Clean Claro acoustical ceiling and wall panels are custom-engineered to a wide range of unique shapes and sizes, and can be styled to compliment any space. Decoustics Easy-Clean Claro comes in Claro Easy-Clean White acoustically transparent finish that achieves up to 85% light reflectance and can be cleaned and disinfected to meet specific design requirements.
Ceilings and Walls above head height.
Panels can be custom engineered to attain a wide range of unique shapes.
Cut outs, different thicknesses and add-on elements are also available.
Up to a maximum of 48″ in width and 96″ in length for Ceilencio® and other ceiling suspension and wall mounting systems. Other sizes may be available, please inquire.
Approximately 1lbs/ft2 (4.88kg/m2) including Ceilencio® suspension system.
Claro Easy-Clean White
Square painted metal edge to match surface finish.
Design Return options and integrated perimeter profiles are also available.
Special vapor barrier option for ceiling application. Option to match to the face of the panel.
Note: The information provided in this Data Table is accurate to the best of our knowledge at the time of publishing. However, we reserve the right to make changes when necessary without further notification. Suggested applications may need to be modified to conform with local building codes and conditions. We cannot accept responsibility for products that are not used, or installed to our specifications.
For detailed information and drawings please visit our Suspension and Mounting Systems page.
Decoustics Ceilencio® is an integrated acoustical panel ceiling system consisting of a proprietary concealed extruded aluminum grid and panels. The ceiling is 100% downwardly accessible via a unique torsion spring mechanism which permits individual panels to be “hinged” down (or completely removed if necessary) for access to mechanical and electrical services. The grid is suspended using hanger wires, rods or similar suspension components.
Typically installed in areas where a floating panel effect is desired. A minimum 4″ (100mm) reveal is required around each panel to facilitate a progressive installation. A 1″ (25mm) reveal around each panel is possible, however perimeter panels require a minimum 4″ (100mm) reveal.
Typically installed in areas where a floating panel effect is desired. A minimum 1″ (25 mm) reveal is required around each panel to facilitate installation. The panels clip onto an installer supplied frame or grid system and are individually removable by lifting upwards moving sideways and lowering. The frame or grid system is secured using hanger wires or rods supplied by the installing contractor.
Typically suspended directly from frame/grid to conceal the metal suspension system. Panels are installed using a mechanical z-clip (slide and engage) method of fastening.
Typically fastened directly to a firm substrate such as gypsum board, concrete, steel deck, wood or a similar surface. Panels are installed using a mechanical z-clip (slide and engage) method.
Panels lay into an exposed standard or custom suspension grid and are supported on all edges. For larger panels an intermediate T-bar is employed and secured to clips on the panel backs to reduce panel sag. The entire assembly lays into the exposed grid. In all cases, the ceiling system is 100% accessible. Ceiling perimeter trim options include an exposed wall mold, shadow mold, or T-bar.
Panel ends are supported at ceiling-wall junctions using exposed wall moldings or T-bar components. Panel can be either butted together, have defined joints or mounted to provide wide reveals. Span panels can be up to 10′ (3050mm) long with 100% accessibility to plenum spaces depending on panel size. Panels are removed by lifting, tilting and lowering.
Typically used in waffle slab construction to create a ceiling with depth and architectural interest. Sunken panels are attached using mounting J-clips and a minimum space of 2-1/4″ (57 mm) is required behind the panel to accommodate hardware and installation. The back of the panels are typically positioned 2-1/4″ (57 mm) down from the top of the recess in the waffle (coffer). A floating panel effect is achieved via a minimum 1″ (25 mm) wide reveal which is required around each panel to facilitate installation.
Design returns can be a great way to finish a ceiling design. Variety of custom design return options are available including: built-up panel edge, knife-edge and continuous extruded aluminum return. Decoustics specializes in finding the right custom solution to achieve your design intent.
A number of wall mounting options are available for panels including: mechanical, hook and loop, adhesive, and magnetic. Mounting hardware will vary based on the substrate and finish of the panel.