Add the warmth of wood with Decoustics’ Fori natural wood veneered acoustical ceiling and wall panels. Fori is designed to provide the aesthetics of a solid wood panel with the acoustic properties of a perforated panel. When viewed from a distance, the mini perforations virtually disappear giving the appearance of a monolithic wood ceiling or wall installation. Fori panels are available in a variety of natural wood veneers, custom stains and paint finishes. Manufactured to custom sizes with the option of unique shapes, Fori panels can be designed to complement any space. For added flexibility in your design, Fori panels can integrate into most of Decoustics’ ceiling suspension systems, including Decoustics’ 100% downwardly accessible Ceilencio® system. All Fori products are manufactured for a precise fit, delivered on site fully finished and ready for installation.
Select one of our most popular veneers below or specify your own. Decoustics has the capability to source a variety of different wood species, or custom stain wood to achieve your design intent.
Decoustics offers a full suite of project management services and utilizes state-of-the-art technology to deliver the ultimate design flexibility. Fori micro-perforated acoustical wood ceiling and wall panels & planks are custom-engineered to a wide range of unique shapes and sizes, and can be styled to compliment any space. To meet any specific design requirements Fori is available in a variety of wood veneers with clear lacquer finish, custom stains, and solid colors matched to a wide range of paint chips. Fori products may be fabricated according to the Forest Stewardship Council® (FSC®) standards and certified by NEPCon, bearing the marks of the Rainforest Alliance® as an advocate for responsible supply chains.
Ceilings and walls.
Panels can be pre-curved and custom engineered to attain a wide range of unique shapes.
Outside curving radius of approximately 32″ (800mm).
Ceilencio: up to 30″ (762mm) in width and 60″ (1524mm) in length.
Ceiling Direct Mount: up to 36” (914.4mm) in width and 72″ (1828.8mm) in length.
Wall Direct Mount: up to 48” (1219.2mm) in width and 96″ (2438.4mm) in length.
* Consult Decoustics for other sizes and custom applications.
Approximately 2lbs/ft2 (9.75kg/m2)
Select one of our nine most popular wood veneers or specify your own. Decoustics has the capability to source a variety of different wood veneers or custom stain to match different wood species.
Veneer lay-up is quarter cut and slip matched. Other options are available.
Nominal 1/16” (1.5mm) and spaced 5/16” (8mm) apart.
Custom perforation patterns and grooving is available.
Custom staining wood to achieve your design intent.
Matching to a wide range of paint chips.
Glossy, matte, metallic options also available.
Square edge banding to match surface finish.
Design return options.
Factory-applied acoustical fleece.
Note: The information provided in this Data Table is accurate to the best of our knowledge at the time of publishing. However, we reserve the right to make changes when necessary without further notification. Suggested applications may need to be modified to conform with local building codes and conditions. We cannot accept responsibility for products that are not used, or installed to our specifications.
For detailed information and drawings please visit our Suspension and Mounting Systems page:
Decoustics Ceilencio® is an integrated acoustical panel ceiling system consisting of a proprietary concealed extruded aluminum grid and panels. The ceiling is 100% downwardly accessible via a unique torsion spring mechanism which permits individual panels to be “hinged” down (or completely removed if necessary) for access to mechanical and electrical services. The grid is suspended using hanger wires, rods or similar suspension components.
Typically installed in areas where a floating panel effect is desired. A minimum 4″ (100mm) reveal is required around each panel to facilitate a progressive installation. A 1″ (25mm) reveal around each panel is possible, however perimeter panels require a minimum 4″ (100mm) reveal.
Typically installed in areas where a floating panel effect is desired. A minimum 1″ (25 mm) reveal is required around each panel to facilitate installation. The panels clip onto an installer supplied frame or grid system and are individually removable by lifting upwards moving sideways and lowering. The frame or grid system is secured using hanger wires or rods supplied by the installing contractor.
Typically suspended directly from frame/grid to conceal the metal suspension system. Panels are installed using a mechanical z-clip (slide and engage) method of fastening.
Typically fastened directly to a firm substrate such as gypsum board, concrete, steel deck, wood or a similar surface. Panels are installed using a mechanical z-clip (slide and engage) method.
|Brochures, Data Sheets & Installation Manuals|
|Direct Mount Ceiling Suspension Data Sheet|
|Direct Mount Installation Instruction Manual|
Panels lay into an exposed standard or custom suspension grid and are supported on all edges. For larger panels an intermediate T-bar is employed and secured to clips on the panel backs to reduce panel sag. The entire assembly lays into the exposed grid. In all cases, the ceiling system is 100% accessible. Ceiling perimeter trim options include an exposed wall mold, shadow mold, or T-bar.
Panel ends are supported at ceiling-wall junctions using exposed wall moldings or T-bar components. Panel can be either butted together, have defined joints or mounted to provide wide reveals. Span panels can be up to 10′ (3050mm) long with 100% accessibility to plenum spaces depending on panel size. Panels are removed by lifting, tilting and lowering.
Typically used in waffle slab construction to create a ceiling with depth and architectural interest. Sunken panels are attached using mounting J-clips and a minimum space of 2-1/4″ (57 mm) is required behind the panel to accommodate hardware and installation. The back of the panels are typically positioned 2-1/4″ (57 mm) down from the top of the recess in the waffle (coffer). A floating panel effect is achieved via a minimum 1″ (25 mm) wide reveal which is required around each panel to facilitate installation.
Design returns can be a great way to finish a ceiling design. Variety of custom design return options are available including: built-up panel edge, knife-edge and continuous extruded aluminum return. Decoustics specializes in finding the right custom solution to achieve your design intent.
A number of wall mounting options are available for panels including: mechanical, hook and loop, adhesive, and magnetic. Mounting hardware will vary based on the substrate and finish of the panel.