High performance acoustics that push the boundaries of designing with wood aesthetics.
Abundant customization capabilities and exceptional sound absorption properties of Quadrillo deliver utmost flexibility when designing with the aesthetic of wood. Quadrillo panels are constructed with a high-performance no-added urea formaldehyde core sandwiched within an engineered composite wood frame. Acoustical absorption is achieved through unique perforations combined with the acoustical core. The percentage of open area is approximately 4%; the v-grooves create a four-sided funnel that allows sound to arrive at a variety of angles, focusing the transfer of energy over a broader surface area of absorption. Quadrillo can be completely customized to suit specific project requirements, it is a fully-engineered product and is available in a large range of natural wood veneers, stains or paint finishes.
- Noise Reduction Coefficient (NRC) of up to 1.00
- Ultimate Design Flexibility while Maintaining Monolithic Appearance
- Fire Rated Class A on Finished Composite Product
- No-added urea formaldehyde core and recycled contents
- Available in FSC® C020536 certified materials
PRODUCT FEATURES
FINISHES
Select one of our most popular veneers below or specify your own. Decoustics has the capability to source a variety of different veneers, or custom stain wood to achieve your design intent.
Decoustics offers a full suite of project management services and utilizes state-of-the-art technology to deliver the ultimate design flexibility. Quadrillo acoustically perforated panels are custom-engineered to a wide range of unique shapes and sizes, and can be styled to compliment any space. To meet any specific design requirements Quadrillo is available in a variety of wood veneers with clear lacquer finish, custom stains, and solid colors matched to any paint chip. Quadrillo products may be fabricated according to the Forest Stewardship Council® (FSC®) standards and certified by NEPCon, bearing the marks of the Rainforest Alliance® as an advocate for responsible supply chains.
| Application | Ceilings and walls. |
| Shapes | Panels can be pre-curved and custom engineered to attain a wide range of unique shapes. Minimum curving radius for outside is 16″ (400mm) and for inside it is 24” (600mm). |
| Sizes | Recommended maximum panel size is 48″ in width and 60″ in length for Ceilencio® suspension system. Larger sizes are possible with other ceiling and wall mounting systems. |
| Thickness | Quadrillo core is available in three thicknesses:
|
| Grooving |
Create your own custom patterns by specifying profile spacing. Solid portions must be multiples of 5mm. |
| Weight | Weight depends on panel thickness and frame. Generally a QPP-25 panel having an overall thickness of 1-3/8″ (35mm) weighs an average of 3.5 lbs. per sq. ft. (17.1 kg/m2), and a QPP-50 panel with thickness of 2-3/8″ (60mm) weighs an average of 5.5 lbs. per sq. ft. (26.85 kg/m2). Solid wood border frames can add significantly to these weights. |
| Wood Veneers | Select one of our nine standard wood veneers or specify your own. Decoustics has the capability to source a variety of different veneers as well as custom stain wood to match different wood species. Quadrillo veneer lay-up is quarter sliced and as slip matched as a standard. Other veneer cuts and lay up options are available by request.
|
| Color/Stain | Custom lacquer toning, tinting and sheen to match other wood finishes. Custom color matching to any paint chip. Glossy, matte, metallic options also available. |
| Edges | Variety of Design Return options is available. |
| Back | Perforated hardboard. |
Noise Reduction Coefficient (NRC) up to 1.00 | Sound Absorption Average (SAA) up to 1.03
Type F5 Mounting: Panels are mounted 5mm from the substrate
Type E400 Mounting: Panels are mounted 400mm from substrate
Note: The information provided in this Data Table is accurate to the best of our knowledge at the time of publishing. However, we reserve the right to make changes when necessary without further notification. Suggested applications may need to be modified to conform with local building codes and conditions. We cannot accept responsibility for products that are not used, or installed to our specifications.
For detailed information and drawings please visit our Suspension and Mounting Systems page.
SUSPENSION AND MOUNTING SYSTEMS
Decoustics Ceilencio® is an integrated acoustical panel ceiling system consisting of a proprietary concealed extruded aluminum grid and panels. The ceiling is 100% downwardly accessible via a unique torsion spring mechanism which permits individual panels to be “hinged” down (or completely removed if necessary) for access to mechanical and electrical services. The grid is suspended using hanger wires, rods or similar suspension components.
SPECIFICATIONS
| United States | |
|---|---|
 | Quadrillo qpp-19 - Ceilencio system |
DETAIL DRAWINGS
INSTALLATION
| Installation Videos | |
|---|---|
| Ceilencio System Installation Video | |
| LED Ceilencio System Installation Video |
Typically installed in areas where a floating panel effect is desired. A minimum 4″ (100mm) reveal is required around each panel to facilitate a progressive installation. A 1″ (25mm) reveal around each panel is possible, however perimeter panels require a minimum 4″ (100mm) reveal.
SPECIFICATIONS
| United States | |
|---|---|
| Quadrllo qpp-50 Specification |
DETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
 | Suspended Reveal Ceiling System Data Sheet |
Typically installed in areas where a floating panel effect is desired. A minimum 1″ (25 mm) reveal is required around each panel to facilitate installation. The panels clip onto an installer supplied frame or grid system and are individually removable by lifting upwards moving sideways and lowering. The frame or grid system is secured using hanger wires or rods supplied by the installing contractor.
SPECIFICATIONS
| United States | |
|---|---|
| Quadrllo qpp-19 qpp-25 qpp-50 specification |
DETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Suspended Accessible Reveal Ceiling System Data Sheet |
Typically suspended directly from frame/grid to conceal the metal suspension system. Panels are installed using a mechanical z-clip (slide and engage) method of fastening.
SPECIFICATIONS
| United States | |
|---|---|
| Quadrillo qpp-19 Specification |
DETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Direct Suspended Ceiling System Data Sheet |
Typically fastened directly to a firm substrate such as gypsum board, concrete, steel deck, wood or a similar surface. Panels are installed using a mechanical z-clip (slide and engage) method.
SPECIFICATIONS
| United States | |
|---|---|
| Quadrillo qpp-19 and qpp-25 specification |
DETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Direct Mount Ceiling Suspension System Data Sheet |
 | Direct Mount Ceiling Installation Detail |
Panels lay into an exposed standard or custom suspension grid and are supported on all edges. For larger panels an intermediate T-bar is employed and secured to clips on the panel backs to reduce panel sag. The entire assembly lays into the exposed grid. In all cases, the ceiling system is 100% accessible. Ceiling perimeter trim options include an exposed wall mold, shadow mold, or T-bar.
SPECIFICATIONS
Contact DecousticsDETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Lay-In Ceiling Panels System Data Sheet |
Panel ends are supported at ceiling-wall junctions using exposed wall moldings or T-bar components. Panel can be either butted together, have defined joints or mounted to provide wide reveals. Span panels can be up to 10′ (3050mm) long with 100% accessibility to plenum spaces depending on panel size. Panels are removed by lifting, tilting and lowering.
SPECIFICATIONS
Contact DecousticsDETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Span Ceiling Suspension System Data Sheet |
Typically used in waffle slab construction to create a ceiling with depth and architectural interest. Sunken panels are attached using mounting J-clips and a minimum space of 2-1/4″ (57 mm) is required behind the panel to accommodate hardware and installation. The back of the panels are typically positioned 2-1/4″ (57 mm) down from the top of the recess in the waffle (coffer). A floating panel effect is achieved via a minimum 1″ (25 mm) wide reveal which is required around each panel to facilitate installation.
SPECIFICATIONS
Contact DecousticsDETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Coffer Ceiling Suspension System Data Sheet |
Design returns can be a great way to finish a ceiling design. Variety of custom design return options are available including: built-up panel edge, knife-edge and continuous extruded aluminum return. Decoustics specializes in finding the right custom solution to achieve your design intent.
SPECIFICATIONS
Contact DecousticsDETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Design Return Ceiling Suspension System Data Sheet |
A number of wall mounting options are available for panels including: mechanical, hook and loop, adhesive, and magnetic. Mounting hardware will vary based on the substrate and finish of the panel.
SPECIFICATIONS
| United States | |
|---|---|
| Quadrillo qpp-19 Specification |
DETAIL DRAWINGS
INSTALLATION
| Brochures, Data Sheets & Installation Manuals | |
|---|---|
| Wall Mount Wood Panel Mounting Instruction Data Sheet |
